Motor paso a paso NEMA 17 / 3.2Kg/cm Pololu 1200

Motor muy preciso ideal para montar tu impresora 3D Prusa Mendel o similar.

Pololu - Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase

Nema17 42 Stepper Motor 40mm 64oz.in (45Ncm) 1.7A 1.8 Degree 2Phase with 1m 4-Pin Cable& Connector for 3D Printer Hobby CNC Router Engraving Milling

STEPPERONLINE 3PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead

Pololu - Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase

Nema 17 5 Kg-cm Bipolar Stepper Motor with inbuilt 20 teeth GT2 Pulley for CNC Robotics RepRap 3D Printer

5Pcs Nema 17 Stepper Motor 40mm 64oz-in 45Ncm 1.7A 1.8 degree 2 phase with

This bipolar Nema 17 stepper motor is one of the most popular model, it with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A at 12V, with holding torque 26Ncm(36.82oz.in).

STEPPERONLINE NEMA 17 Stepper Motor 26Ncm(36.8oz.in) 12V 0.4A 3D Printer CNC

Motor paso a paso NEMA 17 / 3.2Kg/cm Pololu 1200

MOTOR PASO A PASO 14 KG/CM NEMA 23 POLOLU

Nema 17 Stepper Motor 42 High Torque Bipolar DC Step Motor Kit 0.46Nm Low Noise 2-Phrase 1.8°Step Angle for 3D Printer/CNC : Industrial & Scientific

Motor Paso A Paso Nema 17 - 36.8 oz.in - 200 Pasos/vuelta - Electronilab

Pololu - Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

High Torque: 5.5 kg-cm, 53.9 N-cm, 76 oz-in, 4.77 lb-in 4.2 Volt, 1.5 Amp, 1.8 deg per step 21 mm long, 5 mm Shaft with D Cut 2 Phase, Resistance per

Nema 17 Bipolar Stepper Motors RepRap DIY 3D Printer Parts 5.5 kg-cm 76oz-in (Pack of 5)

Pololu - Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase