Light-Link Fiber Optic 8K HDMI Cable — Sewell Direct

The Light-Link is an "HDMI over Fiber" cable that sends the video information through optical fiber. Because it uses fiber, it can send the signal instantly with no perceptible latency at longer distances than regular copper HDMI cables. It also can send much higher resolutions up to 8K at these distances due to the hi

8K Fiber HDMI Cable 30ft, DELONG HDMI 2.1 Fiber Optic Cable Support 8K@60Hz, 4K@120Hz, 48Gbps, eARC Compatible with PS5, Xbox,RTX 3080 3090, Roku,8K TV Black : Electronics

The EchoSplit allows you to send an HDMI signal to two displays with different resolutions while still letting each display perform at its highest supported resolution. Most HDMI splitters allow you to send a single HDMI signal and Mirror it to two or more displays. However, if one of the displays in the setup supports a lower resolution than the rest, then all of the other displays will get a lower resolution because the HDMI splitter can only send an identical resolution to all displays.

Sewell SW-33063 Echo Split 1x2 HDMI Splitter with Downscaling

The Light-Link is an HDMI over Fiber cable that sends the video information through optical fiber. Because it uses fiber, it can send the signal instantly with no perceptible latency at longer distances than regular copper HDMI cables. How it Works The converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of fiber cables and copper cables.

Light-Link HDMI Cable by Sewell, 50 ft 4K @ 60Hz 4:4:4 HDMI 2.0 HDCP 2.2

Sewell Light-Link HDMI Cable, 300 ft : Everything Else

Sewell Direct

Light-Link USB, USB 3.0 over Fiber — Sewell Direct

HD-Link 1080p HD KVM HDMI, USB, Audio, and IR Extender 100m over Cat5e — Sewell Direct

This 1x2 HDMI Splitter and Extender kit lets you split one HDMI signal to two displays using cat5e/6 cable, and extend it up to 160ft. Local HDMI Loop-out The sender unit also features an extra HDMI OUT so you can have a Local Display at the sender location in addition to the 2 remote displays. How it works This kit comes with one sender/splitter unit and two receiver units. Simply connect one to eight receiver units to the sender with Cat5e/6 cable.

HD-Link HL11 by Sewell, 1x2 HDMI Splitter Over Cat5e/6, 160 ft, Black

Silverback Ultra Thin HDMI 2.0 Cables, 4K 60Hz — Sewell Direct

Sewell DVI-D to HDMI Cable — Sewell Direct